About mrsystemengineer

mrsystemengineer · 02-05-2015

Dears, I have one question about get vpn, we have getvpn from HO to branches. branches does not have internet, they access only HO apps. My question is that when i was enable ip accounting on outside-interface of branche router, i see the lots of b...

mrsystemengineer · 04-09-2013

Dear All, I used two sf-300 switch and create 4 vlans and intervlan routing is working fine.Port 1 - 10 -------------> Vlan 1Port 2 -20 ----------------> Vlan 2Port 3 - 30 ------------------> Vl...

mrsystemengineer · 04-07-2013

Dear All,I have some problem in my small network.I have 2 SF-300 48 port switches and connected to 847 router for intervlan routing. I configure 7 vlan in SW1 and uplink to SW2 with trunkport. The problem is that if i used default gateway for users...

mrsystemengineer · 04-06-2013

I have some issue from last 2 month on sf300.The problem is that sf300 does not support complete dhcp, for that i put different internet modem.I connected one internet modem in vlan 1 so users from that vlan can access internet and default gateway is...

mrsystemengineer · 03-28-2013

Dear All, I have some problem in my small network. I have two sf300 switch and configure nealry 8 vlan in sw1. sw1 and sw2 connnected through trunk.1 - 8 ports are in vlan 11 - int vlan 10.1.11.250/249 - 13 port are in vlan 12the problem...

HI guys, In · 02-06-2015

HI guys, In getvpn HO to branches, branches does not have internet and when was try to ip accounting on outer interface of branch router, this is local ip address hitting to public ip address. anybody can tell me how i can filter this and...

mrsystemengineer · 04-10-2013

Dear Dargiel, Really i appreciate your support and thank for that. Please my attached configuration which i was done but still vlan 1 not communicate with vlan 3,4,5,6,7.SW1= with vlan1,2,3,4,5,6,7 with ip address 10.1.x.0/24 10.1.y.0/24 and...

mrsystemengineer · 04-10-2013

Hi aleksandra, Thanks for your email, as per your email i need to make dhcp on router and put static route in 2 switches to router 10.1.6.254 right then i can access all vlans & default gateway svi interface ip created on sf300 switch, and pool c...

mrsystemengineer · 04-07-2013

Hi tom,thank for your email, i was try to put static route in the modem like thisip route 10.1.1.250/24 Wan interface ip address of Modem --------------> 10.1.1.250 SVI ip addressbut this is not working. i can do internvlan routing by removin...

mrsystemengineer · 04-07-2013

HI anybody can help me about my problem please,thanks

Member Since	‎05-29-2005 07:56 AM
Date Last Visited	‎10-24-2024 01:37 AM
Posts	104
Total Helpful Votes Received	10

User Statistics

User Activity

get vpn connectivity and branch user traffic

sf 300 intervlan routing

SF-300 Switch

sf300

sf 300 switch

HI guys, In

Re: Issue to get Vlan communicate on SG300-20

Issue to get Vlan communicate on SG300-20

SF-300 Switch

SF-300 Switch