Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a PIX 515 connecting to a Win2000 server for a site to site VPN connection.The VPN user is accessing a development network on a secondary interface (not inside interface) of the PIX.We already have access-lists on the PIX to limit where the V...
What is required on Cisco View (CiscoWorks 2000) to be able to actually show Dial Services or AAA information on an AS5300.Does CDP need to be enabled on a particular interface? We have the AAA Accounting information configured on the AS5300. When we...
We are running an AS5300 with multiple PRIs. We are using the Group Async 2 interface to support Windows PPP dial-in users.I have found the "absolute-timeout" command and entered it in the Line config section of the AS5300. Is there a way to notify u...
We have an AS5300 setup with a PRI to support Windows (95/98/ME/NT42000/XP)ppp-based user dialin. We are authenticating against ACS v3.0 to a RSA SecureID Server as well as NT 4.0 Domain authentication.Is there a way to set Timeout values for Users?W...
I have an AS5300 setup with 2 PRIsI have created Modem Pools for each PRI and Split the modems (48) evenly between them.The 1st PRI is setup for a propritary application using TCP_Clear and is authenticating against a Cisco Secure ACS v2.3 Unix serve...
You must already have a dummy file with the same name located in the TFTPBOOT directory on the CW2000 server.Just create a blank text file with the name (eg. router-confg) and without the .TXT extension. Now issue the TFTP command from your router/sw...
Thanks for the reply.This message that is printed, is it viewable on a Microsoft Operating System (like 95/98/ME/2000 or XP)?If yes - does it use a "winpopup" type function.If not - is there something that notifies the Windows user who is logged in t...
