About ppatki

ppatki · 04-13-2013

This is what I want to achieve USING the ACE as a reverse proxy.User uses the url https://abc/password - gets to the destination server & the web pageIf user tries to use any thing additional then the connection is dropped at the ACE such ashttps://a...

ppatki · 04-08-2013

I am getting the following error while adding a host into 1000v as shown below(vim.fault.PlatformConfigFault)exceptionI am running Vcentre, 1000v as well as esxi 5.1 in evaluation mode. The server is 1950 dell with standard netwrk card.Can any one he...

ppatki · 04-02-2010

Topology2 6500 core switches with 720 bxl supervisors with ACE blades2 6500 access switchesServer farms with servers behind the ACErouting protocol ospfI can ping from outside to the servers till the ICMP byte size of 375 beyond that the ICMP dosent ...

ppatki · 04-15-2013

The issue was with allowing the image files. I allowed all the image file types in the permit class map in addition to the ones i have permitted already. That now workes.My appologies i by mistake enabled the tab of correct answer for the privious co...

ppatki · 04-02-2010

ganesh,Thanks for your mail but i get respone of 100% packet losss. The servers are physically connected to the access switches but the VLANS are moved to the ACE blades. The devault gateway of the servers ia the VLAN int on the ACE. I get 100% loss ...

Member Since	‎04-02-2010 02:30 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5
Total Helpful Votes Received	1

User Statistics

User Activity

Issue with ACE HTTP class map

Error while adding a host in 1000v

ICMP packets more then 400 bytes dont work

Re: Issue with ACE HTTP class map

Re: ICMP packets more then 400 bytes dont work