About jdewberr

jdewberr · 04-15-2013

Ananthan,You can abosolutely connect an ESX/ESXi box to a Nexus2000/FEX.What version of ESX/ESXi will you be running?--Joe Dewberry

jdewberr · 04-02-2013

Hi Eoin,Here's something I noticed -- to do a good/valid ISSU you'd need to get to at a minimum the 5.0(3)N1(1c) but the waypoints would require a disruptive upgrade. Getting out of the 4.1 code will require at least one reboot/disruptive upgrade. ...

jdewberr · 12-19-2011

Hi Rajeev,I am assuming this is your LAN setup and you have not added in the WAN/BGP part.The first thing to do here is know where you are blocking and where you are forwarding via STP. Have for yourself readily available a visio articulating the ou...

jdewberr · 10-06-2011

HA!I was looking forfeature fexinterfa eth x/yswitch mode fex-fabricCheers!--Joe

jdewberr · 10-06-2011

Hi Dr. Watson,Could you reply with the following commands?show feature | grep enableshow runninter interface ethe 1/1--Joe

Member Since	‎12-10-2005 10:46 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	24

User Statistics

User Activity

Nexus 2K with VM environment

SRG file not present/cannot be opened <- N5K upgrade

Redundancy between L2 device and Router

Nexus 5596UP with Cisco fet-10g SFP -> validation failed

Nexus 5596UP with Cisco fet-10g SFP -> validation failed