Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a firewall with an AIP-SSM-10 module in it. I tried to upgrade the firmware using the recovery mode but it did not work. So now I am trying to re-run the upgrade and I am getting no where with it. I have tried to reseat the AIP-SSM-10 modul...
While using the Web Auth, a user is allowed to try logging in a maximum of three times. Once they reach the third attempt, the wireless connection stops and disconnects. Is there a way to change the unsuccessful logon attempts from three to another...
I have configured my WLC Controller 5508 to use Web Authentication using the Customized (Downloaded) page. I used the WebAuth bundle and the login.tar file from it, uploaded it and It works fine. The only issue is that if someone enters in the wron...
I have a Cisco Wireless LAN Controller 5508, which uses 7.3.112.0. I have the VeriSign certificate but I received two intermediate files (primary and secondary), and my question is, which one do I use?I have referred to this document from Cisco alre...
I have an ASA 5510 using version 8.2(1) and I have enabled ssh, icmp and they work from the inside network but not from the outside network. Further to this, I exposed one site from the inside interface on the ASA (192.168.1.100) to outside (1.1.1.7...
Found the problem. If you press the Enter key you will get the Internal page. If you push the submit button it is fine. So I changed the template code that Cisco provided to disable the use of the Enter key and also added a focus on the text box.
I've already done that Scott and still have the same issue. I even used the default login,tar file to see if there is something wrong with my file, and that didn't help either. Are there any issues in going to v7.5? I am thinking of upgrading it o...
