Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have configured ASA 5510 With IPsec Remote VPN.With local database users(Users are created in ASA).Internal network has 4 VLANS.Need solution for below.There are 25 Users created in ASA. where only 5 tp 6 users wants to grant access to Particual...
I have two questions regarding 3560E switch:1. How many mirroring sessions are supported?2. Does 10G port support mirroring? Are there any limitation related to mirroring with 10G port?I would like to elaborate on the 1st point, We have a...
Hi,I have two ASA 5510 configured with site to site tunnel. on the both side of the ASA 5510 i have configured Redundancy links (terminated 2 ISP links) which is working fine.Now i need to configure Site to site vpn for the backup link. Please sugges...
Hi,I need to configure NAT vpn traffic to external pool ip address in ASAFor example.outside ip address is 1.1.1.10VPN traffic should be nat to 1.1.1.11If i try to configure policy nat or static nat ASA gives me the error " global address overlaps wi...
Hi,I have configured ISP failover on ASA 5510 its working fine, when Primary ISP fails, Traffic is shifting to secondary ISP. On the ASA i have configured Site to Site VPN its working fine on primary ISP, Can any body suggest me when failover happens...
Hi Jennifer,Thanks for the help i configured it today its working fine.I configured the IPsec Remote vpn on the ASA. From Remote vpn client i want to access the servers at the destination end thought site to site tunnel. Request you to please help me...
Hi Jennifer,1. ASA version is 8.22. Destination subnet pool is 10.0.0.0/16 and source pool is 192.168.1.0/24. client has configured in such a way that what ever the vpn traffic reaches to 10.0.0.0 sould be natted to 1.1.1.11 3. its an site to site vp...
Hi,Redundancy of ISP is working fine, Now i need to configure the Site to Site tunnel For secondry link,Thanks for the Replay, Please provide me any doucment to configure the secondry peer.Thanks & Regards,Raghu
