Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IP multicast documentation suggest the "no ip mutlicast ttl-threshold" command to fix an issue I am experiencinghowever my ios (12.1(19) )does not support that command could find nothing in command referenceissue is allworx phone system - directly c...
I have loaded a go daddy wild card cert in ASA 5520 v 9.2 with anyconnect client 3.1.0.303connecting to the SSL page - there are no cert warningshowever the anyconenct client itself does throw a cert warningthe dialoge box does not offer the ability ...
Found the issuewe first upgraded the 4507 to 150-2.SG4but that initself did not change any behaviorafter closer inspection of traffic captures between IP phones and Allworx ( the multicast server)I found that Allworx isn't always using multicast but...
had the same issue 1240 AG root to non-root bridge using 13.5dbi yagi < 1km distanceturns out I had the required connection speed on the G radio interface too high ( 36MBs)backed the required down to 5 leaving all higher speeds enabled cured the iss...
