About dlb

dlb · 01-06-2003

Hello,Setup:Cisco VPN Client (3.1) running on Win 2K Pro ->MS ISA Server (proper protocol defs. and rules are in place and active; remote network has an entry in the LAT)->Internet->Cisco Concentrator 3000 (remote network, I do not admin this device)...

dlb · 01-06-2003

This is what the concentrator admin told me when I inquired about the settings on his end:---begin paste---Here are the configured settings when connecting externally encryption 168-bit 3-DESauthentication HMAC-MD5IPSEC THROUGH NAT - ACTIVE Nat port...

dlb · 01-06-2003

Jazib, thank you very much for helping. I don't see anything about UDP_NAT in the LOG when I connect with IPSec over UDP enabled, that should tell me that IPSec over UDP is not enabled on the concentrator end, correct?I'm not sure which version the ...

dlb · 01-06-2003

Hi Jazib, thanks for replying. I have contacted the admin of the concentrator, he says that it is enabled. Is there any way I can confirm this from my end? Like I said, when I am connected the status shows that IPSec over UDP is 'Inactive', port i...

dlb · 03-14-2002

Just to add a little to what Mike is saying, we were given the following ports to open on our firewall:1. UDP PORT 502. IPSEC/NAT PORT 10,0003. ESP PROTOCOL 50We are thinking that the solution would be to add RRAS to the PROXY 2.0 server and then con...

dlb · 03-14-2002

I have the same issue except the admin. of the network I am trying to connect to gave me the following port information:1. UDP PORT 502. IPSEC/NAT PORT 10,0003. ESP PROTOCOL 50When setting up the filters as directed in MS KB article Q169890 (http://s...

Member Since	‎03-14-2002 12:40 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

Cisco VPN Client (v3.1) -> MS ISA -> Internet -> Cisco Concentrator 3000

Re: Cisco VPN Client (v3.1) -> MS ISA -> Internet -> Cisco Conce

Re: Cisco VPN Client (v3.1) -> MS ISA -> Internet -> Cisco Conce

Re: Cisco VPN Client (v3.1) -> MS ISA -> Internet -> Cisco Conce

Re: PPTP; RRAS; Proxy 2.0; VPN Client 3.1

Re: vpn through MS proxy server on NT4