About spatankar

spatankar · 10-12-2014

Dear All, We have Total 7 SG300 switches for Desktop access dual-homed to Pair of 3560-x switches for Data access in branch environment.All 7 switches have identical configuration, hardware version and were commissioned at the same time.However only ...

spatankar · 10-14-2014

Nothing seems to work , same issue exists even after factory reset,It seems the switch is filtering BPDUs as port facing SG300 of 3560-2 shows 0 BPDUs received.

spatankar · 10-14-2014

Below is configuration for port 32 connected to working SG300.Affected SG300 is connected to port 33 and has identical configuration 3560-1Port 32 (GigabitEthernet0/33) of VLAN0031 is designated forwarding Port path cost 4, Port priority 128, Port...

spatankar · 10-13-2014

Root Bridge port channel[3560 1]---------------------------[3560 2] | | | | | | ...

spatankar · 10-13-2014

Hey, Post upgrading one of the affected switch, new issue is being observed.If both the two links are connected to upstream pair of 3560 switches, a layer 2 loop is found to be occurring with multiple mac flap notifications and traffic utilization sh...

spatankar · 10-13-2014

Dear V K Moorthy,Could you explain how to upgrade SG300 firmware over console, because i could only find below three methods.HTTP/HTTPS that uses the facilities provided by the browserTFTP that requires a TFTP serverSecure Copy Protocol (SCP) that re...

Member Since	‎12-13-2007 11:26 PM
Date Last Visited	‎04-09-2018 06:45 AM
Posts	6

User Statistics

User Activity

Three SG300 keep on restarting (SYSLOG-F-OSFATAL: FATAL ERROR)

Nothing seems to work , same

Below is configuration for

Root Bridge

Hey, Post upgrading one of

Dear V K Moorthy,Could you