Hello,I'm struggling to get exact information regarding licensing requirements for an ASA 5525-X failover pair with CX (AVC and WSE), managed by an off-box PRSM.If we want to position such deployment, which licenses are required to accomplish this?2x...
Hello,To avoid TCAM space filling up to 100%, we are working on disabling Netflow statistics on the couple of 6500 switches. The running IOS version is 12.2(18)SXF11. The Sup is WS-SUP720-3B.According to the Netflow command reference (mls netflow), t...
Hi,I was wondering if there is any update regarding UC on UCS support for booting from iSCSI SAN?I would like to implement the follwoing scenario: B-Series Chassis with an ESX 5.1 B200M3 Server which hosts UC Apps (UCSM 2.1). Could we boot that serve...
Marvin, many thanks for your reply. This sounds logical but if looking at the context of the second sentence on page 50, I do not see any point of pushing a PRSM license to both ASAs. Also the screenshot included in the slide is an AVC subscription l...
Dominic,Sorry to bump the old thread but your entry was the only one I've found.I have observed that this set of commands is enabled after disabling Netflow on the 6500 switch PFC with "no mls netflow".I wasn't able to find any information on these c...
Hi Padma,Yes, I'm aware of that. But the question is - is boot from iSCSI LUN supported for UC on UCS deployments?Can I boot a B200 Server from iSCSI LUN and run Call Manager on top of that?I heard about certain restrictions and a limited TAC support...
