Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Team,
I have 25 L2 switches in downstream and a Layer 3 3750G switch as core.
I need to create around 5 networks( vlans ) in the core. I do not know which network user connected to which port on the downstream L2 switches.
In this scenario, is ...
Hi,I have two ISP's terminating their connections on to their respective routers.I have one ASA 5520 to have two site-to-site VPNs for the same destination one on each ISP PUBLIC IPs.This setup is ment to have automatic Active - failover VPN tunnel ...
Dear Team,My customer is having 8mb lease line.The site to site vpn is created between ASA 5520(Near Side) and ASA 5540(Far side).The mail and other erp applications are running through the tunnel. All the servers are located in far side.The normal t...
Hi,The customer is having linksys p2p on the trust side, nated through a public ip on the asa firewall interface.The call is not maturing. ie, the call is not hitting even the sip server at the isp office.Please find the configuration.Need your input...
Hi Rick,
Thanks for the update.
We have an idea / workaround as below
1. Creating 5 separate L3 vlan interfaces and assigning 5 individual access ports respectively to the corresponding Vlan created in the Core switch.
2. Providing 5 uplinks directly...
Hi Rick,
Thanks for the update.
All the five networks are existing (172.16.10.0/24; 172.18.10.0/24; 192.168.12.0/24; 192.168.1.0/24 and 10.10.10.0/24) and populated in the downstream switches in various ports. Their identification with respect to por...
Hi,Thanks for the update.I added those lines.But the isp is getting 192.168.100.100 entry and not 115.119.26.186 which is allowed ip for the calls to get mature.Any guidance.Regards,Divya
