About b1llysand1er

b1llysand1er · 04-23-2013

This seems like a simple configuration but it's not working and I'm at a loss. I'm unable to ping 1.x devices on the Layer 2 Switch from the 2.x network. I can ping 192.168.1.1 though. (Gi0/0's IP).I plugged my laptop directly into Gi0/1 (192.168.2.0...

b1llysand1er · 04-23-2013

Thanks guys. Those access-lists aren't even applied to any interface so they don't really matter. Anyway, it turns out that the router is fine, it was the devices (Thecus NAS Drives) on the 1.x subnet that were the problem.Thanks again, I gave ever...

b1llysand1er · 04-23-2013

Why would removing the ACL work? Do Cisco routers automatically allow communication between subnets?

b1llysand1er · 04-23-2013

IPv4 Address. . . . . . . . . . . : 192.168.1.43 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1C:\Users\William>tracert 192.168.2.1Tracing route to 192.168.2.1 over a maximum of 30 hops 1 <...

Member Since	‎02-26-2013 03:02 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	4

User Statistics

User Activity

No inter-subnet connectivity.

Re: No inter-subnet connectivity.

Re: No inter-subnet connectivity.

Re: No inter-subnet connectivity.