Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everybody,We have a FlexConnect AP in a remote site. The AP has successully joigned the WLC 5508 (runnig 7.4.100.0) through WAN connection, and broadcats an enabed WLAN. However client do not receive DHCP leases and then can not connect properly t...
Hi everybodyI have a problem with a WGB AP1300 whose Dot11Radio0 interface automatically turn to DOWN once Root AP connectivity is lost.Here's my environment :I have several WGB AP1300. Each WGB is installed on a Bus in order to connect Ethernet equi...
Hi Rasika,In fact I defined an interface on the WLC in vlan XX and defined the WLC as DCHP server and the created a WLAN associated to that interface.The Flex AP has correctly joigned the WLC. The same WLAN boadcasted to other Fex APs works fine. The...
Hi Rasika,Thanks for your response. The Flex AP is connected to a standard router port (not a Truck one). Is it mandatory to be connected to a trunk port ? SVI and DHCP a centrally defined (on the WLC).Best regards.Abmas
Hi Adrian,I issued the following commands :AP1300_1(config)# int d0AP1300_1(config-if)# mobile station period 2 threshold 75I can only issue "mobile station period 2 threshold 75". I can not have other option than "period" in the "mobile station .......
Hi Amjad,- When I allow a while after the WGB enters the WiFi area, the output of the show client detail is : "Invalide client MAC address provided".Indeed the MAC address of the WGB is no longer in the list of the associated clients on the WLC.- Ye...
