Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In security feature template Replay window size and Extended Anti replay what are best practices ?
Should only one be used or both ? What are best practices. We are using normal QOS settings (not per tunnel or per vpn qos).
In logging we saw a lot o...
What are bestpractices when using ZBFW in SDWAN with cedge in regards to selfzone and the controlconnections to vsmart/vmanage and the sdwan bfd sessions. ?
Last couple of weeks we see controlconnections getting droped to vsmarts on all tlocs and sdw...
Question :ACI multi-pod (2pods) with IPN to Multi-pod spines back-to-back.
Clinet is replacing first gen spines in their multi-pod setup with GX spines and wants to eliminate IPN nodes as they are not going to have a extra pod. So they will only stay...
DHCP feature template option ascii string devicespecific var gets mangeld
In device specific values we input for eg. for HP devicemanger option 203 in dhcp :
P1="Overijssel";P2="Zwolle"
But when template is pushed and you do show sdwan running-cifi...
Can CFLOW and Syslog traffic from CEDGE be pinned to a specific TLOC ?
We have AAR in place with traffic being pinned to tloc private 1 (fiber ipvpn in our case) and as fallback private2 is up (LTE connection)
For all traffic from service side vpn's ...
One possible solution is to turn of port hopping under the vpn0 tunnel interfaces feauture template if the tloc is not behind a nat device. In our case it is probably caused by having a fqdn for the vbonds on the vsmarts and cedges for the vbond cont...
Yes when it occurs the cedge looses connections to vsmarts. I'll givbe you output when it happens again. But disconnect reason is always timeout to vsmarts. Could be port hop issue. We use ondemand dynamic tunneling to datacenter that are two separat...
https://www.cisco.com/c/en/us/td/docs/dcn/aci/apic/kb/cisco-multipod-b2b.html#Cisco_Task_in_List_GUI.dita_6e64e3f2-37f5-470b-92ec-e3ab7050f5aa
Found the awnser, looks like you don't have to wipe pod2 fabric but there will be a traffic disruption are ...
replacing "with ' solved some of the issues P1='Friesland';P2='Productiebedrijf Oldeholtpade'was now back in the config as P1='Friesland';P2='Productiebedrijf" Oldeholtpade' So vmanage parser does not like spaces but when you look at config on non s...
