Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have 4 Cisco 831 routers that we are trying to configure for wired 802.1x authentication using CSSC (Cisco Secure service client -- free version). I was wondering what version of IOS (on 831 platform) support the dot1x critical as well as Mac-a...
Hi,We have 4 Cisco 831 routers that we are trying to configure for wired 802.1x authentication using CSSC (Cisco Secure service client -- free version). I was wondering what version of IOS (on 831 platform) support the dot1x critical as well as Mac-a...
Hi,We are in process of installing the AIP-SSM20 modules in ASA5520 (Active/passive). Currently its configured in promiscuous mode /w monitoring all the outside and dmz traffic... I have also tuned various signature to troubleshoot and increase the A...
HiWe are using AS5300 for Dialup. AS5300 is configured to use Raidus using Windows Database (ACS v 3.2). I am trying to configure AS5300 so that when user dialin first time it will ask them to change there password. ( I had enable "User must change ...
Hi We are looking for tools that will allows to control the Network Access. e.g. When user plug in their Laptop or Desktop to Cisco switches they are only allow if we have their Mac-address in allow list or so... Thanks MD
You can try below commands and see if it makes any difference.radius-server host 192.168.233.42 auth-port 1645 acct-port 1646 test username radius01 idle-timeout 1 key Password!radius-server host 192.168.233.44 auth-port 1645 acct-port 1646 test user...
You can try disabling the rtsp inspect.Please refer to below URL:http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807c35e7.shtml#probHTHMD
Hi,I was not monitoring the CPU usage when the inspection load hit 100%. But I will enable the CPU monitoring in MRTG. Also correct numbers for the MRTG peak are below:The statistics were last updated Friday, 5 September 2008 at 23:40,at which time '...
After monitoring for few hours. I am getting the Missed packets events with MRTG showing 11M traffic on Gig0/1 interface.evStatus: eventId=1218593040808080769 vendor=Cisco originator: hostId: caipssm01 appName: interface appInstan...
