Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a easy vpn connection between a asa5505 (Client) and a pix515 (server) which works fine except the dhcp-relay. The problem is that the dhcp request from the client behind the asa is blocked on the pix because the asa sends the request with th...
Hi Tira,in 2.jpg the status is "enable deep discovery". That means, that you still haven't enabled deep discovery. Look at picture dcnm3. If deep discovery is enabled status "managed" is displayed.Regards,Gerhard
Hi yun choul jung,for a deep discovery dcnm needs snmpv3 access to the nexus switch. In the web interface go to Admin>Data Sources and choose the switch(es) you want to do deep discovery. Mark the switches and go to edit (Picture dcnm1). In the next ...
I've got the ASA device package thru software center in LMS 2.6. With the download I got only the package for RME. What's with the package for CiscoView?
it's really annoying. You want to use tftp -> asa uses outside IP. You want to use CiscoWorks RMA for sync archive -> for some reasons I don't know the outside IP of the asa is used and I didn't definitely configure the outside IP in Works. For an in...
