Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I had a hard time determining the best location to post this one since this has components in wireless, IPT, and authentication. But the root of my problem is actually a time issue. If there is a better area to post this please let me know.We have ...
(This appears to be the converse situation of another relatively recent post. I thought it might be better to have a separate thread rather than muddy up that conversation).I have a relatively new deployment of 8 WiSMs controllers (4 of which are cu...
We have a rather large deployment of AP1200's (802.11b radios) in a hospital environment and they've been working fine. But recently I happened across some AP's that for whatever reason even though they have been set to use a particular channel (1,6...
FYI, I was just informed that it will be automatically provisioned upon the VM restart as follows:"When you restart the system after step 4, PI will automatically allocate the new disk space with 85% going to the opt volume and 15% going to the local...
No documented procedure but I have been told you can export your config from your 4402 controller and import it on your 5508 controller. Better yet I have successfully done it. There are some minor changes which may appear as errors on the console ...
I suppose if you also want to look forward to how your network will grow and scale, you may find yourself in our shoes someday. We are now starting to toy with wireless VoIP and that, due to it's QoS needs, uses a different SSID than the standard la...
You have pretty much two choices (as I think has already been mentioned):1) unify your SSID setup for all your locations - we have 25+ locations, and 2 campuses that are using the same SSID for the sake of standard configurations & laptop images.2) Y...
I just wanted to double-check that you are manually restarting the phones after the phones pull down the WLANDefault.xml file from the TFTP server. That hung me up for too long when I was first trying to figure this all out. I was expecting that o...
