Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have a Bose ControlSpace EX conferencing processors with a 2-line VoIP configured as a Third party sip device on our CUCM 12.5. So far, the device has been add to CUCM (registered with no problem) and we are able to dial number inside the netw...
We are currently using 2 Cisco WLC 5508 (software version 8.2.166.0), since early January we are experiencing many problems with one of our WLC. AP disassociate themselves from the controller for a few minutes and reassociate again. It usually starts...
I was having some problem witch prime infrastructure 1.3, so i decided to do a ncs db reinitdb (after backin up ncs). So evererthing went well and after the operation, i am unable to access the web interface. I change the root password but even after...
hello, we have a working wireless network managed by a 5508 WLC and nearly a hundred AP in different buildings. We want to integrate several apple-tv in different WLAN. We enable global multicast mode and igmp snooping on the WLC. When clients conn...
Hello, we have an infrastructure with a Cisco wireless lan controller 5508 and on an SSID we use a web authentication for guest user. We observed that some users managed to connect with username: admin and password: admin. We did'nt create any admin ...
My connectivity to the carrier is PRI. I try a stadard tool free number and it is working so I've made a CDR reporting and when I'm dialing a long distance call (9 + 1 + area code + number) in the report in the Dest No partion and called No partitio...
None of the solutions above worked!The TAC looked at it and the problem seem to be a little bit complicated.Sent from Cisco Technical Support Android App
Here is what i get:Health Monitor Server is running.Reporting Server is runningFtp Server is runningDatabase server is runningTftp Server is runningMatlab Server is runningNMS Server is running.SAM Daemon is running ...DA Daemon is running ...Syslog ...
