Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi im testing the QinQ feature between 2 ASR920 routers - i want traffic flow between 2 bridge domains and i want to use double tag for testing purpose. is it possible on the ASR920 to use a S-TAG lets say vlan 100 and then have the inner C-tag untag...
Hi Im running Prime Infrastucture and want to use SWIM for patch management, but i can`t transfer the Image to my devices, i have tried with diffent ASA Models but the result is the same im getting the error below
Distributing image [asa917-23-k8.b...
Hi
i want to leak prefix from one VRF to another based on a Prefix list.when i leak routes from VRF B to VRF A only static and Connected routes is leaked to VRF A, in VRF B there are also MBGP learned routesand they do not show up in VRF A.i was won...
Hi
I am testing the Cisco Smart collector at one of our customers site. I need to register on the SmartNet total care portal http://www.cisco.com/web/smartservices/sntc.html, to access to collector
When I try to add a contract as required so that I ...
Hi
the company that i work for is in the hosting business, each customer have there own Context on our ASA Clusters.
im in the process of migrating af Customer with a active subscription to CWS, to a context.
from what i can read in the CWS document...
Was a solution ever found for IOS XR ? or is it not possible to change the next hop for traffic localy generated on a IOX XR router ?
i have a GRE tunnel where the tunnel destination address should take another path than it would when looking into t...
Was a solution ever found for IOS XR ? or is it not possible to change the next hop for traffic localy generated on a IOX XR router ?
i have a GRE tunnel where the tunnel destination address should take another path than it would when looking into...
ok - so the config below would would leave traffic for BD10 untagged, with a vlan100 as the transport vlan (S-TAG) interface TenGigabitEthernet0/0/2description ** ASR920-1 **no ip addressservice instance 10 ethernetencapsulation dot1q 100 second-dot1...
what did you find out ?
i am seeing the same thing on a pair of 2120 with a vFMC running 6.2.1.
when navigating in the FMC it is very slow especially when you go want to use Connection/events. deployents takes 5-10min
Hi again
i have copy/paste the route tabel on the router (Core) where the leaking is configured, the prefix 192.168.80.0/24 is leaked and is working, but on other routers (PE) in the MPLS the prefix is not present
hopefully this would clarify my prob...
