Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I have a Cisco 1841. I have two public IP's bound to the outside interface with ip nat outside.I have the inside interface setup with two internal IP's with ip nat insideI need internal host (mailserver) A to send mail to internal host (mails...
I have a 1800 router and am trying to get this config going. Currently it cannot open a socket to the other host. I have two mail servers behind the router on the same lan network but translated to different public IP's. traffic from one server to th...
Hi guys,I have two public subnets one a /28 and a /29. They come to me on one ethernet cable from the ISP. Currently I have the ethernet cable plugged into a switch and have two 1700's running each network. I have two seperate private networks NAT'ed...
I have an 871 right out of the box. Hooked up a VPN to our corporate site and it seems after a while the outside interface drops the connection to the dynamically assigned adsl connection. Happens within hours and somtimes minutes of no traffic. Relo...
I have a lot of domains on the two different servers, and I would have to manually enter either the host entry or the domain on an internal DNS manually everytime another domain is added to the mail server, its a lot of extra work to keep track of. A...
yes they are nated and port forwarded.Current configuration : 9866 bytes!version 12.4service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname Router!boot-start-markerboot system flash c1841-advent...
So it all worked except for one thing. I cant route between the two public subnets. Is there an easy fix?ie.MailServer01 on 192.168.0.1 sends out through 209.143.23.2 ---> 209.143.36.4 incomming to MailServer02 192.168.1.1209.143.23.2209.143.35.4 sec...
