Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
If I'm using configuration synchronization between two Nexus 5k's, does the 'commit' just save to running config ? In other words, after using 'commit' do I manually have to login to both 5k's and copy running to startup ?
We have two Nexus 5020's that will be deployed in a data center with several FEX . I haven't decided yet whether to single or dual home the FEX's or if I'm going to use vPC's right away.Are there things I should consider when numbering the FEX's ? If...
Hi,What is the maximum number of Nexus 2000's (2148T) that can be connected to a single Nexus 5020 ? or this just dependent on the number of ports in the 5020.Thanks
This question involves a basic NAT overload setup using a 6500/Sup720 with native IOS. The plan is to have studentwireless traffic (using private IP's) PAT'd to public IP(s) as it is routed to the Internet.Since I don't have any large scale NAT exper...
I'm hoping someone can clarify a difference that I'm seeing between the PIX 6.x and FWSM 3.x.Assume a 3 interface firewall (outside,inside,dmz) with no address translation going on at all. The inside has the highest security level, the dmz is lower, ...
In case anyone else was wondering about this, I asked my SE about it. He says that you should keep your FEX's numbered differently between different 50xx's, if you do end up dual homing the FEX's you will have problems if they are the same number.
That's my understanding also, you can only do port channels to the host when you use a single connection from two different single homed FEX's (using vPC). Back to my original question, for those with multiple 5020's and FEX's on each one, are you ke...
David,Thanks for the reply. So, if I'm not using address translation and follow these steps with the FWSM I will be Ok ? - no nat-control- no nat0 statements- no static statements- control packet flow with access lists
I'm not having any problems with the operation of the FWSM. I periodically collect ARP information from routers & PIX's and store them in a database. For the PIX's I currently do this with an Expect script that uses SSH. I was just wondering if 3.1(1...
