Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello
I have a UCS-E140S server that seems to have a problem saving the BIOS boot order settings. I go into the IMC management page and can successfully adjust the BIOS boot order sequence but after some time the boot order sequence reverts back to ...
Hello,I have a question regarding eBGP routes and rib-failure. I have two CE routers that I manage. They are peering with two PE routers. OSPF and iBGP is running between the two CE routers. BGP is being redistributed into OSPF as well on the CEs. I ...
Hi MilanI think you nailed it on the head! That's exactly what I was looking for. I think I will assign a higher weight to the peer.I apprecaite your detailed answer. I will make change this week and post results. ThanksPeter
Hi RyanI've posted the OSPF and BGP config on CE1. I am seting the local-preference on CE1 to 150 and CE2 is 200.Thanksrouter ospf 1 log-adjacency-changes redistribute connected subnets redistribute bgp 11111 metric 10 subnets route-map BGP_TO_OSPF n...
Exactly, the OSPF route with the 110 AD is prefered over the 200 AD of iBGP. But I don't understand why the eBGP (AD20) is not being perfered on CE1?Yes, I am redistributing BGP into OSPF redistribute bgp 11111 metric 10 subnets route-map BGP_TO_OSPF...
