Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a client set up with this range:ip local pool ClientVPN 176.16.11.210-176.16.11.241Somehow it is unable to give an IP to the client... If i change the range:ip local pool VPNproduction 176.16.11.150-176.16.11.160It works fine... What could be ...
how can i do this:access-list AL200 permit ip host 172.16.11.27 Units 255.255.192.0 access-list AL200 permit ip host 172.16.11.27 Routers 255.255.255.248 access-list AL200 permit ip host 172.16.11.27 host IMSA access-list AL200 permit ip host 172.16....
Actually it is connected to clientvpn but still doesnt work.ip local pool VPNproduction 176.16.11.150-176.16.11.160ip local pool ClientVPN 176.16.11.210-176.16.11.241Doesnt work:vpngroup user1 address-pool ClientVPNvpngroup user1 dns-server DC01vpngr...
172.16.11.201 doesnt have access to the VPNs... so thats a no go...The problem is that on the old server we had 2 environments which went to 3 VPNS... all using the 200 NAT. Now we made two new server (1 goes to 2 vpns and 1 goes to the third). They ...
hmmmm thats gonna be a problem cause these rules initiate from both sides:access-list AL200 permit ip host 172.16.11.26 host TMGGSNnew access-list AL200 permit ip host 172.16.11.26 TMmeterpool 255.255.240.0i there a work-around for this?
