Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Prime NCS appliance running 1.0.2.29 and I need to upgrade it to 1.1.0.58. I have downloaded the code from the Cisco site but I need to know how to upgrade the NCS.
I have a new deployment with a Cisco 5508-50 controller running 7.0.220.0 code and 35 AIR-LAP1262N-A-K9 access points. Current legacy clients have trouble connecting and after connecting they may or may not drop off and have trouble connecting again....
I have 7 WLANs configured all work fine but the latest. The 7th WLAN I configured will not let clients get an IP address. I can plug a wire into the port with the same VLAN configured on the port and I get an IP address but wireless clients connected...
If I order the PrimeNCS appliance do I have to order licenses also? When I look in NetFormx there is no option to order licenses with the PrimeNCS appliance.
Thanks...I followed the steps in this procedure and all went well until about an hour in to the process I got an error stating that the manifest file was not in the bundle. At this point the transfer stopped and the tftp server shut down
login as:(Cisco Controller)User: dciPassword:********(Cisco Controller) >show interface summaryInterface Name Port Vlan Id IP Address Type Ap Mgr Gu est-------------------------------- ---- -------- --------...
If I change the parameter will it disrupt clients connected to the WLAN?Edward M. VarnerAdvanced Technology ConsultantCCDA,CCENT,CWLANDEevarner@digitalconnections.comCell: 678-778-5306Office: 615-826-5000Digital Connections Inc.http://www.digitalconn...
login as: dci(Cisco Controller)User: dciPassword:********(Cisco Controller) >show interface summaryInterface Name Port Vlan Id IP Address Type Ap Mgr Gu est
