Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,we receive plenty of bad bgp updates from one of our ISP peerwe are able to filter out some messages with the logging discriminator but this only works for logs and lines which include facility+severity+mnemonic and all other lines are not fil...
on https://developer.cisco.com/site/sandbox/ a sandbox call Cisco pyATS XPRESSO is mentionedbut on the link it's empty and searching for XPRESSO also shows no results
Hi all, yesterday I did the mentioned LAB and I was struggeling with the parsers part - unfortunately this was the most important one at the moment (pyats) [developer@devbox genie_learning_lab]$ robot genie_parsers.robot==============================...
Hi all, it's the first time I have reserved a devnet sandbox. This morning I recieved an email telling me that provisioning will take around 15min more minutes and that I would receive an additional email with the anyconnect credentials.After two hou...
I found this one herehttps://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/116189-problemsolution-technology-00.pdfI will try as we have only advertised for oneNeighbor capabilities:Route refresh: advertised and received(new)Four-...
thanks - yes I also want to solve the real issue - what I wanted to say was that I don't filter out specific path or prefixes as it changes and it's not always the same as or the same ipv6 prefix with that issue and we do not have the problem on othe...
