Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All, Kindly let me know on what basis does policing is done on ME3400 & C3550.1. L2 Ethernet Frame ( including Preamble, SFD & FCS)2. L2 Ethernet Frame inlucding Preamble, SFD3. L2 Ethernet Frame excluding Preamble, SFD4. L2 Ethernet Fra...
One can have both VSI & sub-interface based EoMPLS & VPLS if the uplinks is ES-20/SIP-600 and OSM cards.One can only support sub-interface based based EoMPLS if uptime is anything other than the ones stated above
looking forward for the method on which bandwidth stated in the policing command is computated.e.g after enable qos on box & creating proper class-map & policing on an interfacef0/1 for 20mb. If a send 64 byte ethernet frame ( 46 byte-data) what woul...
In a pseudowire vlan is always carried forward from local PE to remote PEThe only issue to look at is that the interface over which the packet would get switched have the right mtu size1500+18+VLAN tag+ VC label+Tunnel label+CW(optional)=1518+4+4+4+4...
one cannot check policy-map on interfaces the same way as one checks the output on routers.3500 series switches have there own way on check QOS.1. Firstly, check qos in enabled on boxmls qos2. To mark COS value while being part of policy-map that tru...
