About Cisco_Business_User

Cisco_Business_User · 01-01-2016

Hello,Although it's not officially supported, it seems that the SPA232D can work with third-party DECT/GAP handsets.After setting "Handset Pairing Passwd" to 0000, I can successfully register any DECT/GAP handset.I set up a SIP profile on DECT Line 1...

Cisco_Business_User · 07-02-2012

Hello all,I'm using a SRP521W-U. I've set up a SIP account on Line 1.I would like to be able to answer incoming calls on both FXS1 and FXS2.How do I achieve that both ports will ring?Thanks.

Cisco_Business_User · 03-15-2012

Hello all,I wondered, how much power do the SRP520-U series actual draw?Compared to commonly used home-grade equipment I think the power consumption is above average?Thanks.

Cisco_Business_User · 01-12-2016

Any news?

Cisco_Business_User · 01-05-2016

I'm curious to your findings.DECT Line 1 SIP is configured correctly, as far as I can tell. If I apply same config on Line 1, outbound calling works fine using a corded telephone.I think this is suspicious:(instance = 0x10000006, source = , dest = , ...

Cisco_Business_User · 01-02-2016

It does register each key press like this:cordless_tick(), got something...cordless_SIP_AP_eventProc(), recevie cmd = 1, src AP = 2instance(0x10000002) not found!However these entries appear after the "make call failed" error (whether entered before ...

Cisco_Business_User · 01-02-2016

I'm using a Motorola D101, but also tried different brands which behaves the same.DECT Line 1 is configured for my SIP provider. Inbound calls are working fine.This is what happens when pressing the off-hook button (without entering a number):cordles...

Cisco_Business_User · 03-26-2014

Cheaper alternative is 880 Series, but only 3G and no gigabit ports.

Member Since	‎03-15-2012 03:50 AM
Date Last Visited
Posts	8

User Statistics

User Activity

SPA232D DECT reorder tone

SRP500 series: answer incoming calls on any FXS port

Power consumption of SRP520-U series

Any news?

I'm curious to your findings

It does register each key

I'm using a Motorola D101,

Cheaper alternative is 880