Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Scott,
As stated on the error:
ERROR : Please run the application upgrade from the system console tomonitor upgrade progress. Use system monitor, serial terminal or a virtual consoleto initiate the upgrade.
You need to run the upgrade command f...
Looking at the version you upgraded to, this could be related to:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvy25845
As stated on the bug, the problem is not seen on 17.3.2
- Yaros
When adding a banner to Prime Infrastructure, it will follow this syntax:
PI/admin# banner install pre-login <filename> repository <repoName>
So you need to create first a repository pointing to your ftp server, make sure you add the ftp user and...
By default commands will run on config mode. In this case, this command should be entered under Priv EXEC mode (enable). So you need to add an additional tag to let Prime Infrastructure know this command will be configured on "enable" mode:
#MOD...
You might be running into following bug:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu53524
Workaround:To workaround this issue, upgrade to Prime Infrastructure 3.7.1 update 02, 3.8 update 02, or later versions which support the new authentica...
