Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Description :
OID for Power supply status via SNMP in ASA 5510.
Information :
Show ver
Cisco Adaptive Security Appliance Software Version 8.4(1)Device Manager Version 7.2(2)
Compiled on Mon 31-Jan-11 02:11 by buildersSystem image file is "disk0:/...
Information to capture the output "show environment temperature" using SNMP in Nexus devices.
Output of the show environment temperature Command Through the CLI
Note: You must be in enable mode in order to issue the show environment temperature comm...
Hi,
As we all know the SNMP view is not available in NX-OS, however if you want to create a group to specify a single OID you can configure a RBAC, see documentation below :
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/con...
Hi,
These OIDs/MIBs should work:
- For cpu statistics (utilization) you can use the CISCO-PROCESS-MIB OID 1.3.6.1.4.1.9.9.109 which displays memory and cpu usage on the router .
- For memory , the one you need is the CISCO-ENHANCED-MEMPOOL-MIB OID...
Hello Gary,
If your Nexus 5k is not running version 7.2 it does not support ACL for version 3.
This is documented under bug:
CSCup94149 Nexus 5000/6000 SNMPv3 per user ACL support
Upgrade to 7.2 release and you will see that now the snmp user ha...
Hi Steven,
Here is the information about this :
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20010227-ios-snmp-ilmi?referring_site=bodynav
and there is a bug filed for this :
CSCdp11863 ILMI community string vali...
Hello John,
This is a known issue,
This version 3.3.4 is two years old, and the 3.3 train is not currently recommended after all the stability issues in a large number of features in that train. It's well publicized that the current recommendation...
