About d_p_grant

d_p_grant · 10-20-2014

I'm testing a new set of 5760 controllers for a future production rollout, running software version 3.6. Our current production setup consists of older WISM-1 and 4402 controllers running CUWN 7.0. Our guest network has an anchor in the DMZ, redir...

d_p_grant · 10-14-2014

I'm testing a pair of 5760s for a near-term production rollout. I have the dot1x employee wlan working, but am having trouble with the guest web-auth wlan. We have a foreign controller with connected APs and an anchor controller in the DMZ. We're...

d_p_grant · 07-03-2012

I have an ACE context sending TCP resets. The configuration is the same as another ACE in a different data center, and in the other data center it is working. I'm doing end-to-end SSL (SSL termination and initiation), and PCAP traces show the ACE s...

d_p_grant · 06-05-2012

I have a pair of ASA 5520s in active/standby failover mode, single context. I'll be migrating to multiple context mode later this week. Do I need to break failover first? Or if I don't need to, should I? Or can I do this while maintaining failove...

d_p_grant · 05-12-2012

We're running ISE 1.1 for guest services. We use Active Directory for Sponsor Portal login, as well as for administration of the ISE itself. Our corporate policy requires a password change for service accounts, and the service account password we u...

d_p_grant · 10-14-2014

I haven't. I had DHCP snooping on the foreign controller for non-anchored WLANs, but was often not getting DHCP addresses, even though the config was right as far as the documentation was concerned. So I pulled it off and started getting addresses....

d_p_grant · 02-03-2006

Thanks for the clarification and an explanation of some of the guts underneath the hood. However, I can't get the profiles I've created in Windows to work in Linux. Can you look at my basic process and tell me what I did wrong? (note: I'm not in fr...

d_p_grant · 02-02-2006

So it seems like I can't create one profile (with the group password already encrypted) on one machine and then import it to others, but need to create a profile with a clear-text group password, that gets encrypted upon first use by each client?

Member Since	‎06-17-2005 06:14 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	23

User Statistics

User Activity

5760 v3.6 guest portal redirect to ISE

5760 guest network not receiving IP address

ACE sending resets

Migrate to multiple context mode on ASA cluster

AD Password Change in ISE

I haven't. I had DHCP

Re: enc_GroupPwd on different platforms (client 4.6)

Re: enc_GroupPwd on different platforms (client 4.6)