Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys, I found below article quite interesting and useful. It provides information about how to configure user and guest vlans in a wireless environment. http://knowurtech.com/cisco/wireless-guest_and_user_vlan.html Best Regards Dinesh
Hi Guys,I found below article quite interesting and useful. It provides information about how to configure user and guest vlans in a wireless environment.http://knowurtech.com/cisco/wireless-guest_and_user_vlan.htmlBest RegardsDinesh
Hi Guys,I am seeing a very high packet drops on the ASA interface. I have verified that duplex settings are fine and there are no errors on the interface. Any idea why these drops are comingfw01# sh interface serverInterface Ethernet0/1.2 "server_vla...
Hi Guys, We often feel the need to know the part number of a line card and we use the show diag command. To find out the exact part number of a device check out the below article. Its really a very useful tip. http://knowurtech.com/cisco/finding_part...
Hi,Thanks a lot for the useful command.I am having a quick query- the droped packets shows in interface status can be due to ACL restrcitions, NAT mismatch etc. Is there a possiblility that it could be due to some physical or device problem on the in...
Hi,At the time of problem you may check the following things.1) is the pix pingable at the time this proble occurs.2) what is the cpu and memory utilization at that time.3) login to consle and see if pix is in hund state and responding.4) you can tak...
Hi Sushil,Since the Layer 3 interfaces of vlan are created on ASA , only l2 vlans needs to be created on the switches. Just create L2 vlan on the switches and you can extend the vlans to more switches.Just make sure that these switches are in same vt...
