Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Although I've been working with couple of Service Providers for 3 years, but sinceI didn't do lots of field work, I always had confusions about slot/port/adapternomenclatures. Can somebody explain me below given output of "sh ip int brief" and "sh di...
Here's the output from one 3640Router#sh verCisco Internetwork Operating System SoftwareIOS (tm) 3600 Software (C3640-IS-M), Version 12.2(40), RELEASE SOFTWARE (fc1)Copyright (c) 1986-2006 by cisco Systems, Inc.Compiled Thu 12-Oct-06 17:43 by pwadeIm...
Hi! Please consider following scene :XXXXXXXX#sh run int Serial0.19Building configuration...Current configuration:!interface Serial0.19 point-to-point description --- XXXXXXXXXXXXXXXXXX ip address XXXXXXXXXXXXXXX ip access-group 19 in <<<<< ----this...
For every router in our organization, if we run snmpwalk with MIB : 1.3.6.1.4.1.9.3.6.11.1.3 on a router that has WIC-1B bri card, we get no response..........is it a known issue ?The chasis is 1721 and IOS is c1700-sy7-mz.123-17a ....I've verified t...
Can we find a way to enhance BGP stability when we are running on reduced IMA bandwidth. Our router has 3xT1 IMA, when all 3 T1s are running properly, we have no problems. When a Layer 1 issue occurs on one of the T1s (reduced bandwidth) then th...
Thanks a lot Jon. I found an interesting article on Cisco's site if anybody's interested,http://cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca737.html#wp1008722
Hi Jon! Thanks for the quick answerI need certain clarification here. Why doesn't router show 64 mb RAM straightaway, instead of showing it in part i.e 49152K/16384K Also, is there any relation between 16384K from 49152K/16384K and 16384K board sys...
