Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I keep getting this message during my day and can't seem to find the problem:WCS has detected one or more alarms of category Switch and severity Major in Virtual Domain rootfor the following items:Radius server '10.26.0.11'(port 1812) is deactivated ...
I have a building that was implemented with 6 AP's(1130) going over 1310G bridges. I've had user complaints that the wireless is slow and found that 12.4 anything was bad IOS(buffer leaks mostly). Now I have found that the AP's are talking to the Wi...
We are just starting to switch over from the 1010's to the 1131's and are curious about the AP. How many can one put on a POE switch(3560) without an injector? Do people prefer using the injectors over the POE since the 1131's use 12 W? I know they c...
I have a set of bridges working right now on 1 vlan..which is the mgmt vlan I believe. What I need to do is add 4 more vlans plus a management vlan to this link for student registration(reg,quarentene,no -access and fullaccess vlans). The SSID I have...
I seem to have come across a problem with roaming between 1130ag's. I changed them to thin clients so the Wism's control them, but I'm receiving complaints since, that people are getting poor response. What I saw was that when someone moves around(st...
When I converted I let the RRM handle it. Yeah, I'd hate to remove the lower speeds and the AP's do work fine. I figured letting the Wism's handle the channelling but the power might be something to look at. Can that be done individually? Or do I nee...
Seems I had a few things going on. I found that reverting back and then going through the upgrade process, WITH the right time, fixed the cert problem. Thanks guys for helping me out on that one. Took me awhile to actually check the time/date stamp. ...
Yeah that's Me..edge-liver. I followed the link you sent and read through it in case I missed a step, and I did exactly those steps. The one thing tho, is that I had to set it up in the 'controller template' I didn't have a 'configure' 'template' in ...
Since I was feeling lucky, and that 1st one worked I tried a second. It followed the doc more closely and I got up to actually entering the CSV cert into the WCS for my controllers..BUT, it never joined getting these messages:Mar 1 00:00:05.529: %LI...
Here's a strange one..but first, thanks Rob for the doc's, I think they saved the day. In going through the doc's I found that enabling the SSC certs in the controllers was necessary. So once doing that, I re-thinned My AP and was trying to find it, ...
