About josh_honeycutt

josh_honeycutt · 01-07-2008

Hi,Scenario - Connecting Cisco 1841 router with WWAN (Sprint) card to existing Corporate WAN using IPSEC VPN. Problem: Tunnel shows up show crypto commands:show crypto ipsec sa - what looks okshow crypto isakmp sa - shows QM_IDLEPROBLEM:I cannot pin...

josh_honeycutt · 01-11-2008

I have put in the route-mpa and it is acting the same. I do show QM_IDLE on the isakmp sa. For ipsec sa - I show enc packets and no decryp packets. I am sitting with the concentrator admin to review today - so I will show him this thread to see if...

josh_honeycutt · 01-08-2008

I verified ACLs as requested. VPN Concentrator is a 3030 and administrator confirmed any 192.168.0.0 to either 168.65.0.0 or 10.0.0.0 is permitted thru the tunnel.I also added a route map with no luck.What is the best way to verify packets going ove...

josh_honeycutt · 01-07-2008

We have double checked ACLs - but we can triple check. What would be the best way to debug if the tunnel is up and if routing is properly configured to go over the tunnel. I ahve tried trace from router and also from a client behind the router and ...

Member Since	‎01-07-2008 08:01 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	4

User Statistics

User Activity

Need assistance with IPSEC VPN connection over WWAN card

Re: Need assistance with IPSEC VPN connection over WWAN card

Re: Need assistance with IPSEC VPN connection over WWAN card

Re: Need assistance with IPSEC VPN connection over WWAN card