About marko.rahne

marko.rahne · 06-07-2007

Helo,I have working environment with PIX 6.3 and remote VPN clients 4.x. Authentication and IP assignmnet are done localy via the following commandscrypto map outside_map client authentication LOCALip local pool Now our customer wants to implement Ci...

marko.rahne · 06-13-2007

I successfully autheticate, but still not received IP address. I try with the following settinng on ACS (user or group properties)-Assign static IP address -Assigned by AAA client pool -Assigned from AAA pool 1) config of my PIXvpngroup SiingVPN de...

marko.rahne · 06-12-2007

I configure exatcly as you said.But what about pool.a) if i remove this command no ip address is assigned to client; I assigned IP address in ACS section "client ip address assignemnet"vpngroup vgroup1 address-pool vpnpoool (vpnpool is defined as loc...

marko.rahne · 06-11-2007

You can configuremanagement-access insideand then telnet via VPN to inside interface

Member Since	‎03-18-2003 04:53 AM
Date Last Visited	‎02-16-2021 08:58 PM
Posts	5

User Statistics

User Activity

How to assign IP address to VPN client with PIX 6.3 and ACS

Re: How to assign IP address to VPN client with PIX 6.3 and ACS

Re: How to assign IP address to VPN client with PIX 6.3 and ACS

Re: Telnet PIX from outside interface?