Has anyone had any success using a Cisco wireless card, either the 350 or mini-pci in a Centrino laptop.I'm trying both cards and the ACU ver 6.0 is not allowed to control the card. The cards work when controlled by Windows XP but the card won't ass...

Can anyone shed some light or documentation on having multiple PPTP connections to a 3030 from the same ip address ? Other than, no that doesn't work.Thanks

I'm using the AP1100 with multiple vlan's and ssid's. Vlan 1 is the native vlan (same as the switch connected to the AP1100). I don't have an SSID for Vlan1.When I do an active Site Survey with the ACU I get a constant incremental for "Lost to Sour...

Does anyone have any experience connecting from a house to an access point or bridge at the office within a mile without line of sight?Any information on equipment, antennas, and distance would be great, Thanks.I was going to try an AP on the roof o...

I'm running ver 6.0(1) with stateful failover and the standby has continuous 210006 errors.The "write standby" commands succeeds and "show failover" looks good with the exception of high tcp conn receive errors on the standby.Any suggestions?