Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got a pair of 1310 bridges running in bridge mode. I'm trying to find a way to automatically run periodic link tests and have them available for analysis. My first thought was to use kron and run the dot11 linktest and view it using syslog. But ...
I just upgraded a site that had older 2924 switches (120-5.WC13) to new 2960 switches (12.2(25)SEE2). The only *isolated* problem I am having is about 10 or so XP machines are not running login scripts. The other 70 or so are working fine. I saw this...
Will the 3560 switch support the 1232AG AP running both A and G radios? I read that the 1232AG DOES NOT support the 802.af standard, only the Cisco "pre-standard" POE spec. I am aware of a past issue where the 1232AG running dual radios draws more po...
Well no answers, but I figured out a way to accomplish this. I'll share!I used a macro program on windows to automate ssh'ing to the 1310, then issued the dot11 linktest command on the device. I then set the logging to debug, and sent the output to m...
Greetings,Thanks for the response! It was a spanning-tree issue. I added the command "spanning-tree portfast" on the switches and it resolved the problem. This is usually a command we have on all client ports, but this time someone else did the confi...
I am testing the 1232AG - Dual radio. POE.The 3560-PWR switch says it is compatible with the 802.af standard as well as the Cisco "pre-standard" POE. Will it run the 1232AG over POE? I seem to remember an issue with the "cisco standard" poe not being...