About nasseerudin

nasseerudin · 01-06-2012

Hi, i just got a sf300 and i need to break down my network to create different subnets.actually i am using the 192.168.1.0 /24 subnet.what i need to do is to subnet my network so that the different vlan cannot talk to each other.for e.gvlan 2 is data...

nasseerudin · 01-18-2012

thanks for replying.but lets say on my vlan 3 ip's are distributed through a dhcp and are dynamic whereas vlan 2 are fixed ip's on the devices.vlan 4 is used to have my servers so vlan 3 need to communicate with vlan 4.in this case i dont want any ...

nasseerudin · 01-16-2012

well to answer your first question:as soon as you open your browser go to >Security >Tcp/Udp services and enable the telnet service and press apply.that shall work.To create vlan you go in vlan management and create the vlan.you can also add the ip...

nasseerudin · 01-16-2012

yes but i would like to restrict the device from talking to other found in different vlan.for example a device in vlan can not talk with vlan 3.i tried to forbid it on the port but it does still ping.so what is really the use of forbidding vlan.

nasseerudin · 01-06-2012

i encounter the following which is related to the above:well i started from scratch and created 3 vlan.vlan 1, vlan 2, vlan 3: management vlan , pc, lap respectively.i connected a pc on port fe 7 and configured for access to vlan 2 only.pc configure...

Member Since	‎10-18-2011 03:52 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

Creating vlans on sf300-getting issue to get right configs.

Re: Creating vlans on sf300-getting issue to get right configs.

SF300-48P

Re: Creating vlans on sf300-getting issue to get right configs.

Creating vlans on sf300-getting issue to get right configs.