Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have four WISM's in two 6509 chassis running 3.2.171.6 and am going to do an upgrade on them in the next couple of days. I know there are several versions that are not the best at keeping the WISM's up, and I wanted to know what version some of yo...
I have recently upgraded my wireless network by converting from autonomous to LWAPP. I have several Symbol PPT8800 handhelds I am using for AdminRX application using LEAP and 128 bit WEP. Once I converted the 1242 AP's to LWAPP and installed the con...
I have a customer in a hosptial that is rolling out three 4402-50's and WCS in their environment. They have a situation where they have mobile laptops in the ER that are logged into by many different folks working on in that area. My problem occurs...
I have just entered a customer location where someone else has configured three controllers in the same mobility group. The one thing that I see that is not normal to me is that the third controller is configured in a different vlan.For example, the ...
I have two 4402-50's and I would love to have any alarms be sent to my email or a pager I have so I more closely can monitor the wireless network. Is this possible and where can I configure it?Thanks in Advance.David BeaverInternetwork Engineering
It is a McKesson Product, but McKesson is telling us that this senario will not support WPA/TKIP. Can you tell me how you are doing this so we can do WPA, specifically, how to configure the PPT8800 for WPA? We would much rather do WPA than LEAP/WEP....
imagnusson,I agree. I also have a dense population of access points and am getting some interference alarms due to the default settings. Since the last response only gave us a definition of "interference", maybe someone can tell us what they have d...
So where do you define the email address that it gets sent to? I don't see that anywhere. It states that it gets sent to "toUser@domain.com". I would like to make that my address only.Thanks,Dave
I must also add that I had the access point plugged into a wall socket as the non-root bridge will obviously not supply Power over Ethernet. I thought I should mention that.
I have done this very thing. You will need to have a cross-over cable between your non-root bridge and the access point. I have two locations where I have things working this way and it works fine. I've added a picture in .gif format so you can see ...
