Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Sirs
My draft architecture
PC1(192.168.11.2/24)<=>F0/1(192.168.11.1/24)(2811R1)F0/0(192.168.1.1/24)<=>F0/0(192.168.1.2/24)(2811R2)F0/1(192.168.13.1/24)<=>PC2(192.168.13.2/24)
config Static routing
2811R1: ip route 192.168.13.0 255.255.255.0 192....
yes..As I said, I use Cisco Packet tracker and the pkt you sent me , They are both workable, But so strange, When I setup the running-config file as above , PC1 and PC2 can not ping each other successfully.
2811R2#sh run
Building configuration...
Current configuration : 1052 bytes
!
! Last configuration change at 08:22:25 UTC Thu Jul 13 2017
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service passwor...
hi Georg
thanks for kind..
My running-config
2811R1#sh ru
*Jul 13 08:09:03.422: %SYS-5-CONFIG_I: Configured from console by consolen
Building configuration...
Current configuration : 1052 bytes
!
! Last configuration change at 08:09:03 UTC Thu J...
