About krock

krock · 03-01-2019

HI all, I have a 5508 WLC controller running 8.3.143.0 software version. This is a new setup I put up so I can steer away from testing in production. I have this controller connected to two Nexus 9k's in a vPC. Every client that trys to connect to ...

krock · 07-12-2017

HI All, I have a question about BFD template with dampening I have the following configured on my ISR router bfd-template single-hop Template1 interval min-tx 150 min-rx 150 multiplier 3 dampening 15 750 2000 60 I know the thresholds that you can app...

krock · 03-07-2019

I am not understanding your question? Did ou mean if I have tried to limit the links in the vpc membership to the WLC?

krock · 03-07-2019

Welll that did the trick.. Thank you... Now I have another question in regards to this. We have this exact setup in 4 different Data centers where it's dual homed to the nexus switches and I never seen this issue come up. We do have different Wire...

krock · 03-06-2019

here is a quick and dirty diagram

krock · 03-06-2019

I already tried that but did it again to provide the debug 1. Configure a new Test WLAN, i.e. "TESTWLAN" to use PSK and use the same interface "sn-int1". This is to isolate AAA override. If this works then check your AAA settings e.g. in ISE/RADIU...

krock · 03-05-2019

here you goo (Cisco Controller) >show wlan 1 WLAN Identifier.................................. 1Profile Name..................................... InternalNetwork Name (SSID).............................. SN-POC-IStatus.................................

Member Since	‎07-12-2017 07:36 AM
Date Last Visited	‎03-14-2019 11:42 PM
Posts	11
Total Helpful Votes Received	5

User Statistics

User Activity

All clients stuck in DHCP_REQD

BFD/Dampening Template question

Re: All clients stuck in DHCP_REQD

Re: All clients stuck in DHCP_REQD

Re: All clients stuck in DHCP_REQD

Re: All clients stuck in DHCP_REQD

Re: All clients stuck in DHCP_REQD