Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey All,We are stacking 2 3750G's together, is there a way to give each 3750 an IP address?We want to do basic ping testing for monitoring and we can't tell if one of the switches dies because the IP address moves to the master switch.CheersDave
Hi All,ok so I am trying to create a STP loop in my network on purpose - but I can't.ok the relavent bits:vr-swt-04#show verCisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2005 by ...
hi all,firstly we have port security turned for the two ports in question - with aging set to inactivity & 2 mins. called gig1/0/1 and gig2/0/1we have a failover netscreen situation with the two eth1's of the Netscreens going into gig1/0/1 and gig2/0...
hi all,which of these two versions are most stable?i am particularily interesting in using 2.2's same security level traffic passing feature. I assume that once this is enabled you must define ACL's to let traffic through? or are they allowed thru by...
Hi All,We are having a few problems with 2 CSS 11000's we have.currently they are running 5.00 build 208.What version should we run? I am _very_ new to CSS's so bear with me.Cheersdave
thread revival: The radiation pattern can be found in the 1815i getting started guide:https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1815/quick/guide/ap1815igetstart.pdf
interesting and good to know about this command.but no there are 0 drops for anything in that list i believe the problem to be that solarwinds is trying to grab routing tables from the ASR, and perhaps the ASR is blocking on this request...
short answer = solarwinds topology mapping (occurs at a 30 min interval)disable or change (ie max) the interval and it fixes the ifmib problems.long answer = hopefully TAC/DE can work out what OID is causing snmp ifmib to hang
Yeah I logged a TAC case and they told me to use "snmp-server ifmib stats cache" (and a restart of snmpd) which worked straight away on 4.3.4, but didn't work at all on the other three ASR's running 4.2.3.BUT I just had another look and my cacti grap...
4.3.4 doesn't solve our snmp timeout issue.here is the strange thing - we have 4 ASR's, a mix of 4.2.3 and 4.3.4, every 30 mins or so each ASR will stop responding to snmp queries.and not at the same time, ie at *:15 and *:45 the first ASR will stop ...
