Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to upgrade the CSS11501 image using the FTP command thru the management port.The laptop is able to ping the switch and the switch the laptop so comms is there. When I run the ftp-record command and then try to ftp the image, it is not co...
We are trying to load balance AJP13 protocol using port 8009 between Apache servers and JBOSS application servers.We are getting Page cannot be found in the browser.Content rule used:content webdev_ajp13_8009 add service dil01 add service dil02...
We have a number of Cisco 2950 48 ports switches and have discovered that they have lost the configuration for no apparent reason. Has anyone come across the same problem?
I have a requirement to configure time restriction to the network and want to setup between 8:00am to 5:00pm network access and no network connectivity outside of these hours.Would appreciate your help.RegardsAnthony
We have 2 servers link into the CSS switch. I am able to ping the servers from the CSS switch but when I do a show service command, the servers are shown as being down.Any help would be appreciated.
The FTP server username and password are xx the command I am using is ftp-record DEFAULT_FTP x.x.0.2 me "me" to setup the ftp-record.I do not see any connection to the FTP server in the FTP logs.Command using to upload the new image is:copy ftp DEFAU...
Hi Zach,Just to let you know that we have run extensive tests and found that if the URL uses the workers file to reference the AJP13 protocol, traffic goes from the Apache servers to the Content Switch VIP but does not forward the traffic onto the se...
