Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've taken bits an pieces of EEM scripts out there and put together an script to trigger an event based on "neighbor-discovery" and cdp. The event triggers when CDP detects a switch containing a hostname. However, I would also like to find the mac ...
What is the proper mtu setting for an MPLS interface on the 9400 to allow full 1500 frame from SVI over the MPLS? It seems to have changed from older IOS on the 6500/6800 to IOS XE16.6 to 16.9. Previously with on a 6500/6800 chassis we used "mtu 1...
Hi All:
I am using 6807-XL with Sup6T for a campus MPLS network. I've setup A-VPLS between to deliver a couple VLANs across the MPLS. I would like to be able to pass spanning-tree (rapid-pvst) across the VPLS, but can't seem to figure out how to do...
Thanks for the link. This was exactly the piece I was missing to get Flexconnect and multiple VLAN CoA working. I missed the Flexconnect Group -> ACL Mapping defining the additional VLANs. No ACL needs to be applied, just leave it "none" so it def...
