Hello,
I was wondering if anybody knows about this specific version no longer support object-group ?
I upgraded it from 03.07.03 to 03.07.05E and now I don't have an option to configure it.
xxxx(config)#ob?
% Unrecognized command
Device Informa...
Hello,
I have a WS-3850-48P running SW Version 03.07.00.E and I noticed the following in the logs:
Jan 29 01:40:00.567 EST: %SYS-2-INPUTQ: INPUTQ set, but no IDB, ptr=396ECA44
-Traceback= 1#7824234920237968b4a0a56d95fed2f2 :54C26000+2783484 :54C2...
Hello guys,
I have a WAP AIR-CAP702-W-B-K9 connected to a Cisco 3850 port and for some reason the port does not see its mac address.
I have tried.
1.Shut and no shut
2. power inline never and back to power inline auto (to reboot AP)
3. TDR cable te...
That is what I will be doing. Reboot first and if not then I will have to put a plan together for upgrade since we have about 800 of those switches here
More information:
#show processes cpu detailed:
Core 0: CPU utilization for five seconds: 100%; one minute: 89%; five minutes: 91%
Core 1: CPU utilization for five seconds: 17%; one minute: 17%; five minutes: 20%
Core 2: CPU utilization for five se...
I did. I tested a working AP in the same port and it ended up working. That is why I did what I said on my previous reply and it is now working but I don't understand why I had to do that in order to work
No its not broken. I received it from Cisco recently and it worked when I plugged in the office.
I got it to work now doing some logically "weird" configuration.
I made the port to be access port with the Wireless Vlan
The controller noticed the AP
...
