Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I would like to change away from a local pool on the ASA, to an internal DHCP server, and the DHCP addresses will be in the same IP range as the internal network.Can someone help with the set up?When I set myself a static IP on my anyconnect conne...
Hi All,Slightly long title there, but this one is strange to me..so:I have a ASA site to site VPN to a remote office in the USA, from a UK office.I have made it so anyconnect users can access this remote site, and this works fine.BUT.. overnight it ...
Hi,
On several of our Windows 10 1803 Laptops, and when connecting to our VPN using Cisco Anyconnect, Windows Defender Security Centre's - Security at a Glance constantly opens and becomes the active window.
Every 5 or minutes it takes the foregr...
Hi All,I have worked through what others have written with Hairpinning traffic back out the same interface but it just doesn't seem to work for me... Simply I am just trying to get my Anyconnect VPN users to connect to some Azure VMs.I have a site to...
Hi There,I am running a Cisco ASA 5512-x version 9.4Is there a way to port forward a bunch of ports from specific external IP address to one of my internal IP addresses. What I currently have is a lot of network objects, all with the same host, each ...
Hi Rob,Thanks for your reply.I'm not really sure how to do a NAT Exemption, and google doesn't seem to help My current NAT for vpn users is this:object network objvpnpool
subnet 192.168.20.0 255.255.255.0
object network inside-network
subnet 192.16...
Hi Guys,Thanks for both of your prompt responses, I've extracted and modified the hopefully relevant pieces of my configs: UK side:object network inside-network
subnet 192.168.0.0 255.255.255.0
object network objvpnpool
subnet 192.168.20.0 255.255.2...
Ok, so I have managed to find the reason why this was occurring, or at least got it to stop.
I have set up Advanced Endpoint Assessment ver. 3.6.1177.2 - Host Scan, under Secure Desktop Manager.
After removing all Microsoft products from all 3 option...
So, sheepishly, it turns out you are correct, I needed to add the subnet to the Azure configuration.It only had my local subnet, and not the VPN users subnet. Fortunately, my Cisco Config seems to be correct.Thanks for all your help.-Tim
Hi Julio, Thanks for your response, the other issue is that we have multiple external IP addresses, and these ports will need to present on not my outbound IP, but on this other IP...i.e.: normal outbound: 7.7.7.7external phone server ip: 7.7.7.8and ...
