Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everybody,when i look on the summary report and filter for "Single Network" - "Appliance", i see the Firewall (MX67 in my case).What does "Device Utilization" mean? Is this CPU? I want to know, if my Firewall reaches some limitations.Where can i s...
Hello,i'm working on the PnP-Function with DNA-Center and Jinja Template. Works good so far.Here is my Question:I want to add multiple VLANs (the exact number of VLAN is not always the same) via a Jinja Template.So i can't do:vlan {{VLANID}}name {{VL...
Hi. I am backing up my PRIME installation (3.4) to an FTP server. The backup file size is approximately 16 GB. However, the file size changed from one day to another to around 100MB and is increasing day by day (starting at 100MB, the next day 198MB,...
Hello,
how are Cisco Twinax Cables compatible with other vendors?
In my case i want to connect a HPE Simplivity-Server to a WS-C3850-12XS-S via Twinax.I can't find a compatibility matrix or something like this.
Regards
Bernhard
Sorry, for my unclear explanation.I don't want the vlan configuration static in the template.The idea was, that the user put the whole vlan configuration in a variable via the GUI.So in the template is something like:{{VLAN_CONFIG}}And in the GUI he ...
Another solution would be, if i could define a variable in the template where i can enter multiple lines.So i can enter a command block like: vlan 10
name Vlan10
!
vlan 20
name Vlan20
!
vlan 30
name Security Cameras Vlan 30Is that possible or are get...
That's a good point. Thank you very much.But in this case i also have to predefine the VLANs i want to create before i do the provisioning.I want it in a way, where the user enters the needed VLANs in the GUI in DNA-Center, when he do the Provisionin...
Thank you for your answer.The Data Retention Values are on default.It seems, that the Problem is the FTP-Server. When i make the backup to the local disk, the file size with 17GB is OK. When i transfer the file to the FTP-Server, the same file has 40...
Not really.The filesize was constant around 16GB till lets say 10.06.2020 and on 11.06.2020 the filesize was 100MB. And on 12.06. it was 148MB and so on. Today it is 435 MB.
