Hello,Does anybody know MTBF for Cisco 2801 and Cisco 2811 voice routers?I'm quite dissapointed after unsuccessfully searching on CCO. The only thing I found (quite funny) is that 2800's have a similar MTBF to 2600's, whose MTBF I didn't find either....
Hi,I'm configuring a couple of CSS11503 to load balance traffic for Weblogic web servers. I'm trying to apply persintence based on cookies. By default, Weblogic server generates cookies with the following format:JSESSIONID=sessionid!primary_server_id...
Hi,I experienced something really weird. I have a Cisco 7507 router connected to a Catalyst 6009 by means of a 100BaseTX FasEthernet connection. I powered the switch off as a high availability test ( there is also another Cat6009 connected to another...
Hi, I´d like to know whether it is allowed to configure a secondary IP address on a CSS' interface, as it is on Cisco routers. If so, how can it be done?Thanks,Enrique
Hi,I´d like to know whether the Content Switching Module ( CSM ) is supported for the Catalyst6009 chassis ( rather than Catalyst65XX ), and if so, what requirements need to be met.Thanks,Enrique
Hi, guysProblem sorted out! Keepalives were disabled on the interface ( misteriously ). Therefore, the "line protocol" remained in the same state as the administrative status.Thanks you all for your help and interest!
so you have this ? WAN WAN 7507 (1)---6509(1)----EtherChannel---6509(2)-------7507 (2) and you shutting down 6509 (1) ?? YESAre 7507s connected by other means ? YES: serial back-to-backplease explain a bit ? Where is HSRP definition ? HSRP is defined...
Hi,We actually have two IP subnets mapped to the same (unique) VLAN by means of the "ip secondary" command:- 180.180.0.0/16 is for user data.- 180.185.0.0/16 is for managemente traffic.Switches' interface sc0 is configured with a 180.185.0.0 ip addre...
