Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greeting to All,
Please guide ......
We migrate our Application Servers from default vlan1 to new vlan10 by removing VLAN 1 SVI and assigning it to VLAN 10 plus changing access port to respective vlan 10 connected to Servers .Now we are facing i...
Dear helipos00,Thanks for information ,Can you share logical diagram and configuration for the task you performed , as we are in the design stage of our project including 1) Our Ring include 2 cpt-600 as (master and slave) plus 4 cpt-50 in the sam...
please find detail as
- clients in vlan Y and Z work with no issue
We have around 50 vlans for client ,so the same application can be access from client exist in different vlans and its work fine with other vlan client.
- clients in vlan X work init...
yes , absolutely right clients exist in VLAN Y,Z can access servers without any problem. We try to move problematic clients in VLAN Y,Z plus have tried to change cable , Switch etc but still same problem exist.
Client Server communication is
Clien...
Dear Dennis Mink,
To make it more clear , initially it was a flat network .
In first stage we moved clients to vlan X ,Y,Z with different subnets based on depart and against each Vlan SVI have configured in Core Switch plus routing enabled so t...
Dear Jon Marshall,
Just see your comments on migration of Servers from Default VLAN to New VLAN , We did the same as you have mentioned i-e have created a new vlan 10 for Server ,remove Vlan 1 SVI and have assigned to Vlan 10 .
Now we are facing pr...
