About eso

eso · 01-29-2003

Hi,Is it possible to connect 2 1401's ATM-25 without any ATM Switch ?ThanksEdward So

eso · 06-25-2002

interface FastEthernet0/0 no ip address speed 100 half-duplex no cdp enableinterface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 192.168.1.1 255.255.255.0interface FastEthernet0/0.2 encapsulation dot1Q 2 ip address 192.168.2.1 255.255.2...

eso · 05-21-2002

My 6509 LANE module got this message, and Idea ?ATM Driver returned HOST_IN_BREAKPOINT to send,port 0 vcd 1 length 8 data @0x019717F8THANKS

eso · 07-14-2003

http://cell-relay.indiana.edu/mhonarc/mplsrc/2002-Sep/msg00109.htmlRe: MPLS support on 2500 ?!From: Robert Raszuk <[email protected]> Date: Sat, 21 Sep 2002 22:47:31 +0200 CC: Mark Lewis <[email protected]>, [email protected] Organization: Sign...

eso · 06-25-2003

Realy work. THANKSCisco Internetwork Operating System Software IOS (tm) 1400 Software (C1400-NSY-M), Version 12.1(5)T12, RELEASE SOFTWARE (fc1)TAC Support: http://www.cisco.com/tacCopyright (c) 1986-2002 by cisco Systems, Inc.Compiled Mon 04-Feb-02 ...

eso · 06-21-2003

Or this config. Which one is right ?int atm0ip add 192.168.1.1 255.255.255.0atm pvc 1 0 32 aal5nlpidmap-group 1 map-list 1ip 192.168.1.2 atm-vc 1 broadcast

eso · 06-18-2003

How about the config ? Is this OK ? Do I need to set the internal clock ?Router Ainterface atm 3/0 ip address 192.168.1.10 255.0.0.0 no keepalive atm clock internal pvc 1/35 protocol ip 192.168.1.20 broadcastRouter Binterface atm 3/0 ip address 192.1...

eso · 09-05-2002

802.1Q encapsulation is now available on the built-in 10BaseT Ethernet interfaces of the Cisco 2610, 2611, and 2612 with Cisco IOS software 12.2(2)T

Member Since	‎05-21-2002 08:22 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	14

User Statistics

User Activity

1401 <- cross over cable -> 1401

Cisco 2620 -> 3Com 4400 route on stack VLAN 1 Problem

ATM Driver returned HOST_IN_BREAKPOINT to send,

Re: MPLS on 2500 or lower end CE models?

Re: 1401 <- cross over cable -> 1401

Re: 1401 <- cross over cable -> 1401

Re: 1401 <- cross over cable -> 1401

Re: IEEE 802.1Q VLAN Trunking on a Cisco 2610: no ip connectivit